Weighmetric Powder Filling Machine
|Weighmetric powder filling machine (aepfw 200) is specially designed to get high accuracy outputs of powder in a limited time. This machine mainly consists of a frame, drive motor, electromagnetic clutch-brake unit, hopper, motor cover, drive shaft, augur and output nozzle. |
Total assembly of the machine is carried by frame made of m. S square pipe of good strength. Top of the frame, there is drive motor, clutch-brake unit, and drive coupling attached to a driven shaft. Below the top plate, is mounted the stirrer motor. Drive shaft from the bearing housing leads downwards and coupled to another shaft which carries the augur.
Hopper is made of stainless steel and is mounted on the frame at the centre. Hopper is having a wide mouth of diameter 425mm and a tapered shape bottom. Height of this hopper is 450mm to 500mm according to the quantity of material to be filled. Bottom of the hopper is the nozzle for the powder discharged. Below the nozzle is a digital weighing machine placed over a bracket to weigh the powder accurately. A panel box is also provided on the main frame to control the total unit.
Frame size 450 lx 450w x 1200mm height.
Total machine height 1880mm(6ft 2 in)
Drive motor 1/2 hp 0.4 kw 3 phase 440vac
Machine cover 10inchw x 15h x 17 l
Electromagnetic clutch- brake 14 t 24 vac
All material contact parts in s. S.
Auger type filling.
Hopper size 15-20 kg. (s. S),16 gauge, mirror finish.
Filling capacity range:
5-50gms (afhs 05),
100-250 gms( afhs 25),
Volumetric filling equipped with digital
One touch start by a foot-switch
Drive through clutch brake system
High output and increased efficiency.
1/8 hp geared stirrer motor (24vdc)
Please use contact form for send message directly to seller. Your message will be sent directly to the recipient and will not be publicly displayed.